RPS 1000

Creates Space for Design, Development & Community

More Space, Less Traffic
Cities and development projects that include green space and common areas in which people can interact are more beautiful, livable, safe and desirable to businesses, tourists and residents. However, attracting people to these urban areas means attracting and parking their cars.

Numerous research studies (by MIT, Transportation Alternatives and others) state that 30% to 50% of traffic congestion in city centers is generated by drivers searching for a parking space. A lack of sufficient downtown parking is often due to the large space required for conventional ramp parking.

Architects and developers regularly have to compromise design or reduce saleable space to accommodate required parking. Sometimes, the large amount of land area required for parking makes the entire project nonviable.


Robotic Parking Systems is the Solution
The top of the line RPS 1000 automated parking system can accommodate from 200 to over 5000 parking spaces using half the space of a ramp-style parking garage. Its high-speed efficiency and fast retrieval times guarantee a satisfying user experience. (Take a look at the RPS 100 and RPS 200 for smaller garages.)

By reducing the land area used for parking, the RPS 1000 gives cities opportunities for more green space or to build parking garages in downtown areas previously considered impossible. And, improved parking greatly reduces traffic congestion.

Developers gain more saleable space. Or, the space saved can be used for green space and open areas to help meet LEED standards.



Modular System
The flexible, modular Robotic Parking System can be built above ground, underground, inside a building, on top of a building or under a building. Lot sizes can be as small as 60 ft. x 60 ft., and the height (or depth) can be up to 150 ft. (The ideal footprint is 100 ft. x 200 ft. by 48 ft. — 60 ft. high.)





True Redundancy for Greater Reliability
The RPS 1000 offers true redundancy. This translates into a greater level of reliability and ensures uninterrupted operation.

All major components have at least one backup system and in some cases as many as four. No single failure will ever result in the system being inoperable.

Robotic Parking System’s HMI (Human Machine Interface) is one of the most sophisticated diagnostics systems in the industry. Its patented high level warning systems provide alerts well in advance of any failures to minimize downtime.

Any mechanical or electronic component can fail. However, the beauty of the Robotic Parking Systems is that even in the event of failure, the system continues to operate. Uptime of the system is unprecedented.





Flexible Façades
The façade is completely flexible and can be designed to blend in with neighboring buildings with a look that is contemporary, historic, traditional, etc. Any type of material can be used — concrete, wood, brick, stone, aluminum, etc. It is completely up to the imagination of the owner and his architect.





Safer & More Secure
Robotic Parking Systems virtually eliminate the risk of vehicle damage or theft as well as the risk of personal injury so common in conventional lots and garages. Rather than spending an exorbitant amount of time driving around looking for a parking space, drive up to the garage and enter the ground level entry terminal; get out and lock the car; push a few buttons and simply walk away. When leaving, the driver returns to a well lit lobby where the car is quickly delivered to a ground floor exit terminal. Get in and drive away. Hassle free!


Eco-friendly & Cost Effective
The RPS 1000 is a green parking solution. Electromechanical automatic parking reduces CO2 emissions and other pollutants and greenhouse gases. No cars are run inside the garage so there are no choking car emissions to ventilate. Also, since cars are not circling the block looking for a parking space, there is less pollution and less traffic congestion. Drivers get off the street faster!

Overall development cost can be significantly lower than for a conventional garage. Since there are no people or running cars inside the garage, there are lower lighting and ventilation requirements. Lower insurance costs, lower personnel expenses and smaller land area required and more – all add up to increased savings.

Underground applications are particularly well suited to the RPS 1000. Because only half the space is needed for the same amount of parking as conventional garages, developers can save as much as 50% on the excavation alone.


Enhanced System Design

Typical Design

High-bay, stacker type design where all three movements (in and out, up and down, back and forth down the aisles) are handled by one central unit. In the case of failure, an entire portion of the garage can become inoperable.

The Robotic Parking Systems Patented Design

Enhanced, patented design where all three movements are separated and handled by individual intelligent components with true redundancy. No single failure will ever result in the garage becoming inoperable.

 

CAD Files

Download CAD files here.

BIM Files

Download Building Information Modeling files here.

Frequently Asked QuestionsLearn more

Our design team can help you come up with creative solutions. Learn more

Comprehensive maintenance programs ensure a high level of reliability. Learn more

Visit our Photo Gallery. Click here

Watch Robotic Parking Systems in action. Learn more

© 1994-2013 Robotic Parking Systems, Inc. All Rights Reserved. Patents Pending.